Agilent Technologies 1220 Infinity II LC User Manual page 265

3
Press the lower sides of the cover to unclip it. Remove
the cover.
5
Unscrew the two holding screws.
7
Place the new DCGV into position. Make sure that the
valve is positioned with the A-channel at the
bottom-right position. Tighten the two holding screws
and connect the cable to its connector.
1220 Infinity II LC System User Manual
4
Disconnect the DCGV cable.
6
Remove the DCGV.
8
Tighten the two holding screws.
Maintenance and Repair
Solvent Delivery System
11
265