Cleaning The Module - Agilent Technologies 1220 Infinity II LC User Manual

Cleaning the Module

The module case should be kept clean. Cleaning should be done with a soft
cloth slightly dampened with water or a solution of water and mild detergent.
Do not use an excessively damp cloth allowing liquid to drip into the module.
Liquid dripping into the electronic compartment of your module can cause shock
WA R N I N G
hazard and damage the module
➔
➔
1220 Infinity II LC System User Manual
Do not use an excessively damp cloth during cleaning.
Drain all solvent lines before opening any connections in the flow path.
Maintenance and Repair
Diode Array Detector (DAD)
11
303