Exchanging The Can Cable - Agilent Technologies InfinityLab LC Series User Manual

5 Maintenance and Repair

Exchanging the CAN Cable

Exchanging the CAN Cable

Voltage in the Instant Pilot
C AU T I O N
Damage to the electronics

Electronic boards and components are sensitive to electrostatic discharge
C AU T I O N
(ESD).

1 Place the Instant Pilot face down on a bench (as shown in
2 Carefully remove the labels that are across the screws.
G4208A User's Guide
Before you open the Instant Pilot, the CAN-cable must be disconnected
from the HPLC module to assure that no voltages are present in the Instant
Pilot.
In order to prevent damage always use an ESD protection when handling
electronic boards and components.
page 154).
Figure 103 on
153