Two Methods To Determine The Mac Address - Agilent Technologies 1220 Infinity II LC User Manual

13 On the BootP Settings screen, click OK. The Agilent BootP Service Setup screen
14 Click Finish to exit the Agilent BootP Service Setup screen.
15 Remove the DVD from the drive.
16 Start BootP Service in the Windows® services: On the Windows® desktop

Two Methods to Determine the MAC Address

Enabling logging to discover the MAC address using BootP
If you want to see the MAC address, select the Do you want to log BootP requests?
check box.
1 Open BootP Settings from Start > All Programs > Agilent BootP Service >
2 In BootP Settings... check Do you want to log BootP requests? to enable logging.
3 Click OK to save the values or Cancel to discard them. The editing ends.
4 After each modification of the BootP settings (i.e. EditBootPSettings) a stop
1220 Infinity II LC System User Manual
• The default gateway is 192.168.254.11
indicates completion.
This completes installation.
click right on Computer icon, select Manage > Services and Applications >
Services. Select the Agilent BootP Service and click Start.
EditBootPSettings.
Figure 16 Enable BootP logging
The log file is located in
C:\Documents and Settings\All Users\Application Data\Agilent\BootP\LogFile
It contains a MAC address entry for each device that requests configuration
information from BootP.
or start of the BootP service is required for the BootP service to accept
LAN Configuration
Automatic Configuration with BootP
4
73