Agilent Technologies 1220 Infinity II LC User Manual page 289

3
Rotate the gripper arm slowly from left to right and apply
a gentle pressure to the paper clip. The clip will engage
on an internal catch and the rotation of the arm will be
blocked.
5
The gripper arm will come off.
Next Steps:
7
On completion of this procedure: Install the front cover.
8
Turn the power to the Instrument ON.
1220 Infinity II LC System User Manual
4
Hold the paper clip in place, press the gripper release
button and rotate the gripper arm to the right.
6
Replace the gripper arm by holding the paper clip in
place, pushing the gripper arm into the holder and
rotating the gripper arm to the left.
Maintenance and Repair
Autosampler
11
289