Agilent Technologies 1220 Infinity II LC User Manual page 305

3
Unscrew (do not remove) the four lamp screws (Pozidriv)
as required.
5
Remove the Vis-lamp and place it on a clean place.
N O T E
Do not touch the glass bulb with your fingers. It may
reduce the light output.
1220 Infinity II LC System User Manual
Diode Array Detector (DAD)
4
Remove the deuterium lamp and place it on a clean
place.
N O T E
Do not touch the glass bulb with your fingers. It may
reduce the light output.
6
Insert the deuterium lamp (RFID tag on the top side).
Maintenance and Repair
11
305