Operations; Starting And Terminating The Operation Software; Selecting An Item To Be Adjusted - Sony HKSP-313 User Manual

Operations

When the power is supplied to the UCP-8060, the system
indicator lights in red. When initialization of the unit is
finished normally, the indicator lights in green, and the
Main Screen appears in the display window. You can
select the menu or items or adjust the parameters
displayed in the window with the jog roller, jog buttons,
select buttons, and control knobs. The display window
also functions as a touch panel, and you can select the
menu and items, by touching on-screen objects.
Starting and Terminating the
Operation Software
Starting the operation software
1
Turn the jog roller to select the operation software to
be started on the Main Screen.
2
Push the jog roller or the select R button (Launch).
The selected operation software is activated.
HKSP-313 HD COLOR CORRECTOR Version 1.xx
Slot1
Delay Sync Phase
Option
You can select the operation software by touching the
appropriate on-screen object on the Main Screen.
Auto Start Function
When the auto start function is set, the top page of this
operation software appears instead of the Main Screen of
the UCP-8060 when the power of the UCP-8060 is turned
on.
For details on setting the auto start function, refer to the
Operation Manual of the UCP-8060.
Sync Phase Coarce
0
-128 127
Sync Phase Fine
0
0 1024
Status
13:01:01
Terminating the operation software
1
Press the select L button (Option) on the top page of
this operation software.
The Option Menu appears.
2
Turn the jog roller to select "8. Exit Application."
3
Push the jog roller.
The operation software terminates, and the Main
Screen appears.
You can also select "8. Exit Application" by touching in
on the screen.

Selecting an Item to be Adjusted

Touch a button on the touch panel to select your desired
item.
The buttons are classified into three types as follows:
• To display the next layer
• To set or perform the displayed item
• To toggle the item On or Off
For example to adjust MODE, follow the procedures
below.
1
Press the MODE button.
The list of choice appears on the third column from
the left.
HKSP-313 HD COLOR CORRECTOR Version 1.xx
Slot1
Line
720p
C/C
Convert MODE C/C
Option
Press to select an item.
2
Press the desired button among the displayed list.
The following list of choices appears if there are any.
If the button has a function to toggle ON or OFF,
setting is changed to ON or OFF each time the button
is pressed.
Status
13:01:01
Cursor (yellow)
45
Operations