Hazard Warning Switch; Windshield Wiper And Washer Lever - Suzuki Baleno Manual

Hide thumbs Also See for Baleno:
Table of Contents

Advertisement

Hazard warning switch

EXAMPLE
68PM00236
Push in the hazard warning switch to acti-
vate the hazard warning lights. All turn sig-
nal lights and both turn signal indicators
will flash simultaneously. To turn off the
lights, push the switch again.
Use the hazard warning lights to warn
other drivers of possible risk of traffic haz-
ard when you park your vehicle in case of
emergency.
Windshield wiper and washer
lever
WARNING
To avoid possible injury, do not oper-
ate controls by reaching through the
steering wheel.
BEFORE DRIVING
Wiper and washer operation
When the ignition switch is in "ON" position
or the ignition mode is "ON", you can use
the wiper/washer lever.
Windshield wipers
EXAMPLE
65D611
To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In "INT" position, the wipers
operate intermittently. The "INT" position is
very convenient for driving in mist or light
rain. In "LO" position, the wipers operate at
a steady low speed. In "HI" position, the
wipers operate at a steady high speed. To
turn off the wipers, move the lever back to
"OFF" position.
68PM00237
2-134
68PM2-01E

Advertisement

Table of Contents
loading

Table of Contents