Glass / Windows / Mirrors; General Description; Windshield Construction - Suzuki Grand Vitara 2011 Manual

9E-1 Glass / Windows / Mirrors:

Glass / Windows / Mirrors

Body, Cab and Accessories
Rear End Door Window Defogger System Description
The rear end door window defogger is controlled by BCM. For the BCM description refer to "BCM General Description
in Section 10B".

Windshield Construction

The windshield is installed by using a special type of adhesive (that is, one component urethane adhesive used with
primer). For the windshield replacement, it is important to use an adhesive which provides sufficient adhesion strength
and follow the proper procedure.
CAUTION
!
• Described is the glass replacement by using 3 types of primers and 1 type of adhesive made by
YOKOHAMA (one component urethane adhesive to be used with primer in combination). When
using primer and adhesive made by other manufacturers, be sure to refer to handling instructions
supplied with them. Negligence in following such procedure or misuse of the adhesive in any way
hinders its inherent adhesive property. Therefore, before the work, make sure to read carefully the
instruction and description given by the maker of the adhesive to be used and be sure to follow the
procedure and observe each precaution throughout the work.
• Should coated surface be scratched or otherwise damaged, be sure to repair damaged part, or
corrosion may start from there.
Use the specific adhesive which has the following property.
Glass adhesive shearing strength
40 kg/cm 2 (569 lb/in 2 ) or more

General Description

3
1. Windshield glass
2. Windshield molding
3
1
2
I5JB0A950001-01
3. Fastener
S6JB0A9501001
S6JB0A9501002