JVL MAC050 User Manual page 28

2.3
2.3.5 Register overview in MacTalk
The following screen is shown in MacTalk when selecting Coil Mode.
Main parameters used in coil mode
Startup mode
Choose "Coil mode"
Profile Data
All these parameters
can be used to limit the
motion. For example
the maximum torque
or velocity.
Coil mode parameters
Set P1 to P6 in this
field according to
the description in
this chapter.
The general setup, such as selecting maximum velocity, gear ratio and input type setup,
is similar to Gear Mode. Only the Coil Mode parameters differ from Gear Mode.
For details of the overall setup, please See Gear Mode, page 19.
24 JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
Coil Mode
Gear factor
The ratio between
the incomming pulses
and the actual motor
movement is specified
here.
TT1127GB