1.4
Setting up the MAC motor
Pressing "OK" disconnects the motor from the PC application and all data can be edited
without any interruption in the motor. The following MacTalk view is presented.
TT1152GB
As seen in the bottom info line, the motor is disconnected and the filedata is currently
present in MacTalk. To re-establish communication with the motor, simply press the
"Go Online" button and if any data has been changed a warning box appears enabling the
user to save current data before re-establishing communication with the motor as this
will overwrite existing data in MacTalk.
If data is changed in MacTalk the user is warned that current data in MacTalk may be
overwritten and needs to be saved. The following warning message box appears.
TT1154GB
Choosing "No" will immediately upload all motor data, presing "Yes" will save all data in
the open file.
JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
15