JVL MAC050 User Manual page 216

4.8 Expansion module MAC00-P5
4.8.10 Cables for the MAC00-P5
The following cables equipped with connectors can be supplied by JVL.
MAC00-P5 Connectors
"CNT" "COM" "SLV"
Harting M12 con.
M12con
8pin 5pin 5pin
male Female Male
X
X
Protection caps. Optional if connector is not used to protect from dust / liquids.
X
Important: Please note that the cables are a standard type. They are not recommended for use in ca-
ble chains or where the cable is repeatedly bent. If this is required, use a special robot cable (2D or 3D
cable).
212 JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
Description
.
RS232 Interface cable. Connects
directly from MAC00-P5 to a PC
Length: 5m (197 inch)
RS485 Interface cable. Connects
X directly from a master to a slave
motor. Length: 3m (197 inch)
Cable with M12 female 5 pin
X
straight connector, loose ends.
Length: 5m (197 inch)
X
Same as above but 20m (787 inch)
Please contact JVL for further de-
tails
IP67 protection cap for M12
female connector.
IP67 protection cap for M12
X
male connector.
JVL Order no.
RS232-M12-1-5-5
WI1005-M12F5TF5T03P
WI1000-M12F5T05N
WI1000-M12F5T20N
-
WI1000-M12FCAP1
WI1000-M12MCAP1
Only MAC400&800
Picture