JVL MAC050 User Manual page 224

4.9 Expansion Module MAC00-R1/R3/R4
5
Press the second button to create
the second program line
6
Choose the movement type needed.
Relative: Move x counts forward with
reference to the actual position.
Absolute: Move to the x position with
reference to the zero search position.
7
The relative move command just
entered is converted into a program
line.
8
Multiple program lines are
entered by the user forming
the last part of the program.
9
Now the program is finished.
Press the
button.
Now the program will be transfered
and stored permanently in the module.
The program will be executed
immidiately
TT0984GB
220 JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
"Transfer & Start"
Continued