JVL MAC050 User Manual page 244

4.9 Expansion Module MAC00-R1/R3/R4
4.9.10.25 Calculator (Options)
Icon:
Dialogue:
Function:
240 JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
The options tab contains various settings that affect the operation of the
Calculator command. "Calculation precision" is, at the time of writing,
locked to 32-bit precision. This is not an error, and should not be reported.
"Register listing and naming" provides an alternative method of entering
ata into the dialogue, by selecting "simple list with short firmware names".
Instead of selecting, for example, "3 Requested position" to access
register no. 3, you can simply type "P_SOLL". If you wish to enter a
constant, you simply enter the digits-the dialogue will not mistake the
constant for a register number.
If you are in doubt about a register name, look at the expression in the
caption of the dialogue box. A recognized register name will appear in the
expression. An unrecognized register name will appear as a zero. You
can switch between the two methods of data entry at any time.