Expansion Module Mac00-Fs1/Fs4 - JVL MAC050 User Manual

4.7

Expansion Module MAC00-FS1/FS4

4.7.1 High speed serial RS485 module MAC00-FS1 and FS4 Introduction
The MAC00-FS1 and FS4 are used for high speed RS485 communication typically in multi
axis systems. They are capable of running at Baud-rates up to 460kbit.
All the registers of the MAC motor can be read and written.
The modules includes a few inputs and outputs, 2 of which can be defined as end-limit
inputs. These can be read from the RS485 interface.
The MAC motor is controlled by writing to the internal registers in the motor.
The expansion modules MAC00-FS1 and FS4 can be mounted on the standard MAC mo-
tors MAC50, MAC95, MAC140, MAC141, MAC400-800.
Both modules offer the same functions but with the following hardware differences:
Type
MAC00-FS1
MAC00-FS4
Note*: IP65 on MAC400-800
Both modules are delivered without any cables as standard.
Optional the MAC00-FS4 module can be delivered with cables in 5 or 20m length.
The pages in the first part of this section concern the common features of both modules.
Please consult the last pages in this section to see specific information about each module
such as example connection diagrams.
JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
MAC00-FS4
With M12 connectors
Protection
I/O.
class
IP42 DSUB 15 pole
M12 connector 8pin
IP67/IP65*
male and female
MAC00-FS1
With D sub connectors
Connectors
Power supply
3 pole Phoenix
M12 connector
5pin male
TT1068GB
RS232/485
DSUB 9 pole
M12 connector
5pin female
199