JVL MAC050 User Manual page 221

4.9 Expansion Module MAC00-R1/R3/R4
4.9.5 MAC00-RxP Main window
The main window for creating a new program or editing a program is shown below:
JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
MAC00-RxP menu
Main menu for creating a new program,
Verifying program size and other basic
details for the MAC00-RxP module.
Transfer & Start
Will transfer the complete
program and start it.
Use Stop or Pause to stop it.
Stop
Use this button if the program
must be stopped.
Program lines
Each button represents a program
line. By pushing the button a com-
mand can be entered at the program
line.
MAC00-RxP Status texts
The message Program not transferred
that there is a difference between the program
seen on the screen and the actual program in
the module. This can happen if the program
have been edited but not transferred.
Status: Running (or Stopped
program in the module.
Pause
Use this button if the program must
be paused. Paused means that the actual
program line executed is temporarily paused.
When paused, the single step feature can be
used to debug the program.
TT0981GB
means
) refers to the
217