JVL MAC050 User Manual page 162

Integrated servo motors
Hide thumbs Also See for MAC050:
Table of Contents

Advertisement

4.4
Expansion Modules MAC00-FC2/FC4
PDO identifier:
In the CANOpen® profile it is only possibly to have four transmit and four receive PDOs
enabled at the same time. In the MAC00-FC2/FC4 all PDOs are disabled when the mod-
ule is booted up, the user has to choose which PDOs the application is to use, and enable
these.
The PDO configuration can be seen either in the EDS-file or in the CanOpen Explorer
program, here the communication and the mapping parameter are shown.
There are two standard methods to map the PDOs in CAN-Open, there is an static map-
ping and a dynamic mapping. In the static PDO mapping all PDOs are mapped in accord-
ance with some fixed non-modifiable setting in the relevant PDO. In the dynamic PDO
mapping the setting for a PDO can be modified. It is also allowed to have flexible combi-
nation of different process data during operation. The MAC00-FC2/FC4 module, use
only static mapping.
4.4.50
SDO (Service Data Objects):
SDO: can access all entries in the object directory, but they are normally used in the in-
itialization, during the boot up procedure. Some SDOs characteristic are:
-
Confirmed transfer of objects
-
Data transfer/exchange is always non-synchronous
-
Values greater than 4 bytes are transferred (Normal transfer)
-
Values not more than 4 bytes are transferred (Expedited transfer)
Basically a SDO is transferred as a sequence of segments. Prior to transferring the seg-
ment there is an initialization phase where client and server prepare themselves for
transferring the segment. For SDOs, it is also possible to transfer a data set of up to four
bytes during the initialisation phase. This mechanism is called an expedited transfer.
Down loading SDO protocol
The download SDO protocol is used to write the values of the object directory into the
drive
158
JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
Client
0
7...5
Request
CCS=1
0
Confirm
SCS=3
TT1088GB
1
4
3...2
1
0
X
n
e
s
1
7...5
4...0
X
Server
4
8
8
d
m
Indication
8
4
m
reserved
Response

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mac800Mac141Mac400

Table of Contents