JVL MAC050 User Manual page 222

4.9 Expansion Module MAC00-R1/R3/R4
4.9.6 MAC00-RxP menu
The MAC00-RxP menu found at the top of the main window gives access to following
possibilities:
MAC00-RxP menu:
Program + Source
Shows the memory usage if the program
(compiled)+source program and remarks
is downloaded into the module.
Program + Source - REM
Same as above but without remarks.
Program only
Same as above but without source
program and remarks.
Checksum
Shows the checksum of the complete
program downloaded into the module.
The checksum is unique and can be used
to verify whether the program in the
module matches the original program or
not.
Lines
The number of program lines used in the
source program (MacTalk)
Mode
Specify the program type actually used.
Enable input filter
Enables an oversampling filter at the inputs IN1 to IN8.
This feature can be used to remove noise from the inputs.
Skip initialization (advanced)
Bypasses internal initialization routines after powerup.
(Only for very special use).
Program + Source + Remarks
Default. Choosing this will transfer everything into the
module memory. This can be an advantage if remarks
and source program must be uploaded to MacTalk later.
Program + Source
Same as above but without remarks.
Program only
Only the compiled program is transfered.
218 JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
Described elsewhere in this chapter
Upload the program from the module to MacTalk
TT0982GB