JVL MAC050 User Manual page 235

4.9 Expansion Module MAC00-R1/R3/R4
4.9.10.12 Conditional jump (multiple input)
Icon:
Dialogue:
Function:
JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
Tests for an input condition, before either jumping to another line in the
program, or moving on to the next line in the program. If the condition is
met, the command jumps to the specified program line. If the condition
is not met, the program proceeds to execute the next line in the program.
When "input type" is set to "Multiple", Multiple inputs can be tested for
being either high or low.
The "Operand" setting determines whether one or all of the inputs must
meet their test criterion. If set to "And", all inputs must match their test
settings. If set to "Or", only one input need to match its test setting.
Inputs that are set to "Don't care" are not tested.
After pressing the OK button, the dialogue will disappear, and the mouse
cursor will change. The next program line that you click on will then
become the destination for the jump command.
231