Checking The Configuration - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
pim bfd { min-tx-interval tx-value | min-rx-interval rx-value | detect-multiplier
multiplier-value }
The PIM BFD parameter values are changed, including the minimum interval for sending PIM
BFD detection messages, minimum interval for receiving PIM BFD detection messages, and
local detection multiplier.
By default, the minimum interval for sending PIM BFD detection messages and minimum
interval for receiving PIM BFD detection messages are both 10 milliseconds, and the local
detection multiplier is 3.
----End

4.13.4 Checking the Configuration

Prerequisite
The configuration of PIM BFD is complete.
Procedure
l
l
----End
Example
Run the display pim interface vlanif vlan-id verbose command, and you can view the PIM
information on the specified interface.
<Quidway> display pim interface vlanif 15 verbose
VPN-Instance: public net
Interface: Vlanif15, 10.0.0.15
Issue 01 (2009-07-28)
*
Run the display pim interface [ vlanif vlan-id | up | down ] [ verbose ] command to check
the information about the PIM interface.
Run the display pim bfd session [ interface vlanif vlan-id | neighbor neighbor-address ]
*
command to check the information about the PIM BFD session.
PIM version: 2
PIM mode: Sparse
PIM state: up
PIM DR: 10.0.0.15 (local)
PIM DR Priority (configured): 1
PIM neighbor count: 0
PIM hello interval: 30 s
PIM LAN delay (negotiated): 1800 ms
PIM LAN delay (configured): 1800 ms
PIM hello override interval (negotiated): 60000 ms
PIM hello override interval (configured): 60000 ms
PIM Silent: disabled
PIM neighbor tracking (negotiated): enabled
PIM neighbor tracking (configured): enabled
PIM generation ID: 0XE5F4034D
PIM require-GenID: disabled
PIM hello hold interval: 36000 s
PIM assert hold interval: 3600 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM state-refresh capability on link: non-capable
PIM BSR domain border: enabled
PIM BFD: enabled
PIM BFD min-tx-interval: 100 ms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 PIM-SM Configuration
4-45