Establishing The Configuration Task; Enabling Ip Multicast - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast

3.4.1 Establishing the Configuration Task

3.4.2 Enabling IP Multicast

3.4.3 Enabling PIM-DM
3.4.4 Checking the Configuration
3.4.1 Establishing the Configuration Task
Applicable Environment
PIM-DM is applicable to the small-scale network. Most network segments of the network have
receivers.
Pre-configuration Tasks
Before configuring basic PIM-DM functions, complete the following task:
l
Data Preparation
To configure basic PIM-DM functions, you need the following data.
No.
1
3.4.2 Enabling IP Multicast
Context
Enabling IP multicast is the prerequisite of configuring other IP multicast protocols. Do as
follows on the S9300.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
multicast routing-enable
IP multicast routing is enabled.
----End
Issue 01 (2009-07-28)
Configuring the unicast routing protocol to ensure that IP routes between nodes are
reachable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 PIM-DM Configuration
Data
Number of the interface where PIM-DM is
enabled
3-5