Configuring The Description Of An Msdp Peer - Huawei Quidway S9300 Configuration Manual - Multicast

5 MSDP Configuration
l
You can adjust the interval for re-establishing the MSDP peer relation.
Pre-configuration Tasks
Before setting the parameters for controlling the MSDP peer relation, complete the following
tasks:
l
l
Data Preparation
To set the parameters for controlling the MSDP peer relation, you need the following data.
No.
1
2
3

5.5.2 Configuring the Description of an MSDP Peer

Context
Do as follows on the S9300 where an MSDP peer is configured.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
msdp
The MSDP view is displayed.
Step 3 Run:
peer peer-address description text
The description of the MSDP peer is configured.
By default, no description is configured for an MSDP peer.
----End
5-10
A faulty MSDP peer attempts to restore works.
Configuring the unicast routing protocol to ensure that the IP routes between nodes are
reachable
5.4 Configuring Basic MSDP Functions
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
Data
Description of the MSDP peer
Address of the remote MSDP peer
Interval for retrying establishing the TCP
connection
Issue 01 (2009-07-28)