Maintaining Pim-Dm; Clearing The Statistics On Pim Control Messages; Monitoring The Running Status Of Pim-Dm - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
According to the preceding information, PIM silent is enabled.

3.12 Maintaining PIM-DM

This section describes how to clear statistics on PIM control messages, how to commission PIM,
and how to monitor the running status of PIM-DM.

3.12.1 Clearing the Statistics on PIM Control Messages

3.12.2 Monitoring the Running Status of PIM-DM

3.12.3 Debugging PIM-DM
3.12.1 Clearing the Statistics on PIM Control Messages
Context
Statistics on PIM control messages on an interface cannot be restored after you clear them. So,
confirm the action before you run the command.
Procedure
l
----End
3.12.2 Monitoring the Running Status of PIM-DM
Issue 01 (2009-07-28)
PIM hello override interval (configured): 2500 ms
PIM Silent: enabled
PIM neighbor tracking (negotiated): disabled
PIM neighbor tracking (configured): disabled
PIM generation ID: 0X161C232F
PIM require-GenID: disabled
PIM hello hold interval: 105 s
PIM assert hold interval: 10 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM state-refresh processing: enabled
PIM state-refresh interval: 10 s
PIM graft retry interval: 10 s
PIM state-refresh capability on link: capable
PIM BFD: disabled
PIM dr-switch-delay timer : not configured
Number of routers on link not using DR priority: 0
Number of routers on link not using LAN delay: 0
Number of routers on link not using neighbor tracking: 1
CAUTION
Run the reset pim control-message counters [ interface interface-type interface-
number in the user view to clear statistics on PIM control messages on an interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 PIM-DM Configuration
3-29