Logical Relationships Between Configuration Tasks - Huawei Quidway S9300 Configuration Manual - Multicast

Terabit routing switch
Hide thumbs Also See for Quidway S9300:
Table of Contents

Advertisement

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
l
Multicast VLAN Replication
Through replication of a multicast VLAN, the S9300 can send multicast packets to different
VLANs. This function facilitates management and control of the multicast source and members
of multicast groups, and saves bandwidth.
IGMP Snooping
The S9300 supports VLAN-based IGMP snooping. You can set the following parameters or
functions of IGMP snooping:
l
l
l
l
l
l
l
l
l
l
l
l
l
When providing layer 3 multicast services, the S9300 can forward multicast packets according
to the layer 2 inbound interface of a super VLAN. After the IGMP snooping function is enabled
in a sub VLAN, the S9300 selects a layer 2 interface according to the inbound interface in the
IGMP Report message sent by a host. In this way, the S9300 forwards the packets from the
multicast source to this interface, rather than broadcasting the packets in the sub VLAN.

1.3 Logical Relationships Between Configuration Tasks

This section describes the logical relationships between the configuration tasks.
If you want to...
Enable a user to receive multicast packets
from a multicast source for a long time
Implement multicast replication among
VLANs
Implement IGMP snooping
Issue 01 (2009-07-28)
Reducing the network delay by directly searching the multicast forwarding table to transmit
multicast packets
IGMP version
Multicast forwarding mode
Static router interfaces
Disabling dynamic learning of router interfaces
IGMP querier
Response to changes in the Layer 2 network topology
Prompt leave of member interfaces
Suppression of IGMP messages
Multicast group policies
Aging time of a router interface
Maximum response time of multicast members
Router alert option
Source IP address of IGMP messages
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Layer 2 Multicast Configuration
Then...
1.4 Configuring Static Layer 2 Multicast
1.5 Configuring Multicast VLAN
Replication
1.6 Configuring IGMP Snooping
1-3

Advertisement

Table of Contents
loading

Table of Contents