Pim-Sm Configuration - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
About This Chapter
This chapter describes the procedure for configuring PIM-SM on the IP network and the
commands for maintaining PIM-SM, and provides configuration examples.
4.1 Introduction to PIM-SM
This section describes the basic information about PIM-SM.
4.2 PIM-SM Features Supported by the S9300
This section describes PIM-SM features supported by the S9300.
4.3 Logical Relationships Between Configuration Tasks
This section describes the logical relationships between the configuration tasks.
4.4 Configuring Basic PIM-SM Functions
This section describes how to configure PIM-SM to implement ASM and SSM multicast models.
4.5 Setting the Parameters for Controlling a Multicast Source
This section describes how to control the forwarding of multicast data according to the multicast
source on the PIM network.
4.6 Setting the Parameters for Controlling Source Registration
This section describes how to set the parameters of a PIM-SM Register message.
4.7 Setting the Neighbor Control Parameters
This section describes how to set the parameters for controlling the PIM-SM Hello message.
4.8 Setting the Parameters for Controlling a Dynamic RP
This section describes how to set the control parameters of a C-RP and a C-BSR, and the
parameters for controlling the transmission of Advertisement messages and Bootstrap messages.
4.9 Configuring the Administrative Domain
This section describes the applications of the PIM-SM administrative domain and method of
configuring the PIM-SM administrative domain.
4.10 Setting the Forwarding Control Parameters
This section describes how to set parameters for controlling the PIM-SM Join/Prune message.
4.11 Setting the Assert Control Parameters
This section describes how to set parameters for controlling the PIM-SM Assert messages.
Issue 01 (2009-07-28)
4

PIM-SM Configuration

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 PIM-SM Configuration
4-1