Huawei Quidway S9300 Configuration Manual - Multicast page 184

4 PIM-SM Configuration
S9300-C
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure the IP addresses of interfaces and the unicast routing protocol on each S9300.
# Based on
the S9300s through OSPF to ensure that S9300-A, S9300-B, and S9300-C can connect to each
other at the network layer and can dynamically update routes through the unicast routing
protocol.
For how to configure IP addresses of interfaces, see
Interface
configure OSPF, see
Routing.
Step 2 Enable multicast on all S9300s, PIM-SM on all interfaces, and IGMP on the interfaces connected
to hosts.
# Enable multicast on all S9300s, PIM-SM on all interfaces, and IGMP on the interface through
which S9300-C is connected to the leaf network. The configurations of S9300-A and S9300-B
are similar to the configuration of S9300-C, and are not mentioned here.
[S9300-C] multicast routing-enable
[S9300-C] interface vlanif 102
[S9300-C-Vlanif102] pim sm
[S9300-C-Vlanif102] igmp enable
[S9300-C-Vlanif102] igmp version 2
[S9300-C-Vlanif102] quit
[S9300-C] interface vlanif 300
[S9300-C-Vlanif300] pim sm
[S9300-C-Vlanif300] quit
[S9300-C] interface vlan 100
4-64
GE 1/0/0
GE 2/0/0
GE 3/0/0
Configure the IP addresses of interfaces and the unicast routing protocol.
Enable the multicast function on all S9300s, enable PIM-SM on all interfaces, and enable
IGMP on the interfaces connected to hosts.
Configure the same static RP on each S9300.
Perform the SPT switchover on S9300-C.
Address of multicast source S: 10.110.5.100/24
Address of multicast group G: 225.1.1.1/24
Version of IGMP running between S9300-C and the leaf network: 2
Figure 4-3, configure the IP address and mask of each interface on S9300s; connect
in the Quidway S9300 Terabit Routing Switch - Basic Configuration. For how to
OSPF Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
VLANIF 100
VLANIF 102
VLANIF 300
Assigning an IP Address to an
in the Quidway S9300 Terabit Routing Switch - IP
192.168.1.2/24
10.110.2.1/24
192.168.2.2/24
Issue 01 (2009-07-28)