Setting The Forwarding Control Parameters; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual - Multicast

Terabit routing switch
Hide thumbs Also See for Quidway S9300:
Table of Contents

Advertisement

4 PIM-SM Configuration
According to the preceding information, the PIM BSR administrative domain is enabled on
VLANIF 15.
Run the display pim bsr-info command, and you can view the BSR information.
<Quidway> display pim bsr-info
VPN-Instance: public net
Elected AdminScoped BSR Count: 1
Elected BSR Address: 10.0.1.20
Elected BSR Address: 10.0.1.20

4.10 Setting the Forwarding Control Parameters

This section describes how to set parameters for controlling the PIM-SM Join/Prune message.

4.10.1 Establishing the Configuration Task

4.10.2 Setting the Forwarding Control Parameters
4.10.3 Setting the Prune Control Parameters
4.10.4 Checking the Configuration
4.10.1 Establishing the Configuration Task
Applicable Environment
When the first group member appears on an S9300, the S9300 sends a Join message through the
upstream interface, requiring the upstream device to forward messages to this network segment.
When the last group member leaves, the S9300 sends a Prune message through the upstream
interface, requesting the upstream device to perform the prune operation and to stop forwarding
multicast data to this network segment. If other downstream multicast devices exist in this
network segment, they must send Join messages to override the prune operation.
In the ASM model, an S9300 periodically sends Join messages to the RP to prevent the RPT
branch from being deleted because of timeout.
4-32
PIM state-refresh capability on link: non-capable
PIM BSR domain border: enabled
PIM BFD: disabled
PIM dr-switch-delay timer : not configured
Number of routers on link not using DR priority: 0
Number of routers on link not using LAN delay: 0
Number of routers on link not using neighbor tracking: 1
Priority: 0
Hash mask length: 30
State: Accept Any
Scope: Global
Uptime: 00:06:19
Expires: 00:16:34
C-RP Count: 0
Priority: 0
Hash mask length: 30
State: Accept Any
Scope: 239.0.0.0/24
Uptime: 00:04:38
Expires: 00:16:34
C-RP Count: 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
Issue 01 (2009-07-28)

Advertisement

Table of Contents
loading

Table of Contents