Configuring Basic Pim-Ssm Functions; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual - Multicast

4 PIM-SM Configuration
Example
Run the display pim interface vlanif 15 verbose command, and you can view the PIM
information on VLANIF 15.
<Quidway> display pim interface vlanif 15 verbose
VPN-Instance: public net
Interface: Vlanif15, 10.0.0.15
According to the preceding information, PIM silent is enabled.

4.15 Configuring Basic PIM-SSM Functions

This section describes how to configure basic PIM-SSM functions.

4.15.1 Establishing the Configuration Task

4.15.2 Enabling IP Multicast
4.15.3 Enabling PIM-SSM
4.15.4 Configuring a Range of PIM-SSM Multicast Group Addresses
4.15.5 Checking the Configuration
4.15.1 Establishing the Configuration Task
Applicable Environment
The SSM model is a subset of PIM-SM; therefore, you need to enable the PIM-SM function on
all S9300s on the network. In addition, the range of SSM group addresses also needs to be
configured. By default, the range of SSM group addresses defined by IANA is used.
4-48
PIM version: 2
PIM mode: Sparse
PIM state: up
PIM DR: 10.0.0.15 (local)
PIM DR Priority (configured): 1
PIM neighbor count: 0
PIM hello interval: 30 s
PIM LAN delay (negotiated): 500 ms
PIM LAN delay (configured): 500 ms
PIM hello override interval (negotiated): 2500 ms
PIM hello override interval (configured): 2500 ms
PIM Silent: enabled
PIM neighbor tracking (negotiated): disabled
PIM neighbor tracking (configured): disabled
PIM generation ID: 0X161C232F
PIM require-GenID: disabled
PIM hello hold interval: 105 s
PIM assert hold interval: 10 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM state-refresh processing: enabled
PIM state-refresh interval: 10 s
PIM graft retry interval: 10 s
PIM state-refresh capability on link: capable
PIM BFD: disabled
PIM dr-switch-delay timer : not configured
Number of routers on link not using DR priority: 0
Number of routers on link not using LAN delay: 0
Number of routers on link not using neighbor tracking: 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
Issue 01 (2009-07-28)