Setting The Parameters For Controlling A Dynamic Rp; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual - Multicast

4 PIM-SM Configuration
Interface: Vlanif15, 10.0.0.15

4.8 Setting the Parameters for Controlling a Dynamic RP

This section describes how to set the control parameters of a C-RP and a C-BSR, and the
parameters for controlling the transmission of Advertisement messages and Bootstrap messages.

4.8.1 Establishing the Configuration Task

4.8.2 Changing the Values of C-RP Parameters
4.8.3 Setting Global C-BSR Parameters
4.8.4 Configuring the BSR Service Boundary
4.8.5 Configuring the Range of Valid BSR Addresses
4.8.6 Configuring the Range of Valid C-RP Addresses
4.8.7 Checking the Configuration
4.8.1 Establishing the Configuration Task
Applicable Environment
This configuration task is performed to configure the dynamic RP of the ASM model. If you
want to use only static RPs, skip this task.
S9300s configured with default values can work normally. You can change the values of relevant
parameters according to the specific network environment. If there is no special requirement,
default values are recommended.
4-22
PIM version: 2
PIM mode: Sparse
PIM state: up
PIM DR: 10.0.0.15 (local)
PIM DR Priority (configured): 1
PIM neighbor count: 0
PIM hello interval: 30 s
PIM LAN delay (negotiated): 500 ms
PIM LAN delay (configured): 500 ms
PIM hello override interval (negotiated): 2500 ms
PIM hello override interval (configured): 2500 ms
PIM Silent: disabled
PIM neighbor tracking (negotiated): disabled
PIM neighbor tracking (configured): disabled
PIM generation ID: 0XE5F4034D
PIM require-GenID: disabled
PIM hello hold interval: 105 s
PIM assert hold interval: 3600 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM state-refresh capability on link: non-capable
PIM BSR domain border: disabled
PIM BFD: disabled
PIM dr-switch-delay timer : not configured
Number of routers on link not using DR priority: 0
Number of routers on link not using LAN delay: 0
Number of routers on link not using neighbor tracking: 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
Issue 01 (2009-07-28)