Layer 2 Multicast Configuration - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
About This Chapter
This chapter describes the procedures for configuring static Layer 2 multicast, multicast VLAN
replication, and IGMP snooping, and provides configuration examples.
1.1 Introduction to Layer 2 Multicast
This section describes the functions and advantages of Layer 2 multicast.
1.2 Layer 2 Multicast Features Supported by the S9300
This section describes the Layer 2 multicast features supported by the S9300.
1.3 Logical Relationships Between Configuration Tasks
This section describes the logical relationships between the configuration tasks.
1.4 Configuring Static Layer 2 Multicast
This section describes how to configure static multicast entries in a VLAN.
1.5 Configuring Multicast VLAN Replication
This section describes how to configure the multicast VLAN replication function.
1.6 Configuring IGMP Snooping
This section describes how to configure IGMP snooping in a VLAN.
1.7 Maintaining Layer 2 Multicast
This section describes how to clear the static entries in a multicast forwarding table.
1.8 Configuration examples
This section provides several configuration examples of Layer 2 multicast.
Issue 01 (2009-07-28)
1

Layer 2 Multicast Configuration

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Layer 2 Multicast Configuration
1-1