Huawei Quidway S9300 Configuration Manual - Multicast page 222

5 MSDP Configuration
<S9300-B> display msdp peer-status
MSDP Peer Information of VPN-Instance: public net
MSDP Peer 192.168.2.2, AS 200
Description:
Information about connection status:
Information about (Source, Group)-based SA filtering policy:
Information about SA-Requests:
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
# Run the display pim routing-table command to view the PIM routing table on an S9300.
When multicast sources S1 (10.110.1.2/24) in PIM-SM1 and S3 (10.110.3.2/24) in PIM-SM3
send multicast data to multicast group G (225.1.1.1/24), Receiver (10.110.2.2/24) in PIM-SM2
can receive the multicast data. The PIM routing tables displayed on S9300-B and S9300-C are
as follows:
<S9300-B> display pim routing-table
VPN-Instance: public net
Total 0 (*, G) entry; 1 (S, G) entry
(10.110.1.2, 225.1.1.1)
<S9300-C> display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 2 (S, G) entries
(*, 225.1.1.1)
(10.110.1.2, 225.1.1.1)
5-30
State: Up
Up/down time: 00:15:47
Resets: 0
Connection interface: vlanif200 (192.168.2.1)
Number of sent/received messages: 16/16
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 00:17:51
Import policy: none
Export policy: none
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
RP: 1.1.1.1(local)
Protocol: pim-sm, Flag: SPT EXT ACT
UpTime: 00:00:42
Upstream interface: vlanif200
Upstream neighbor: 192.168.1.1
RPF neighbor: 192.168.1.1
Downstream interface(s) information:
Total number of downstreams: 1
1: vlanif100
Protocol: pim-sm, UpTime: 00:00:42, Expires:-
RP: 2.2.2.2(local)
Protocol: pim-sm, Flag: WC RPT
UpTime: 00:13:46
Upstream interface: NULL,
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: vlanif300,
Protocol: pim-sm, UpTime: 00:13:46, Expires:-
RP: 2.2.2.2
Protocol: pim-sm, Flag: SPT MSDP ACT
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
Issue 01 (2009-07-28)