Configuring A Rule For Filtering Pim-Sm Register Messages; Configuring Pim-Sm Register Suppression - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
No.
2
3
4

4.6.2 Configuring a Rule for Filtering PIM-SM Register Messages

Prerequisite
An ACL rule for the RP filtering Register messages is created.
For the configuration of the ACL, see
Routing Switch Configuration Guide - Security.
Context
Do as follows on the S9300s.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
pim
The PIM view is displayed.
Step 3 Run:
register-policy advanced-acl-number
The rule for filtering Register messages is configured. The RP receives or rejects Register
messages according to this filtering rule.
Step 4 Run:
register-header-checksum
The S9300 calculates the checksum only according to the header of a Register message.
The Register messages that fail to pass the verification are discarded. By default, an S9300
calculates the checksum according to the entire Register message.
----End

4.6.3 Configuring PIM-SM Register Suppression

Issue 01 (2009-07-28)
ACL Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 PIM-SM Configuration
Data
Whether to calculate the checksum according
to only the header of a Register message
Timeout period for keeping the register
suppression state
Interval for sending null Register messages to
the RP.
in the Quidway S9300 Terabit
4-15