Huawei Quidway S9300 Configuration Manual - Multicast page 185

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
[S9300-C-Vlanif100] pim sm
[S9300-C-Vlanif100] quit
Step 3 Configure the static RP.
# Configure the static RP on S9300-A, S9300-B, and S9300-C. The configurations of S9300-B
and S9300-C are similar to configuration of S9300-A, and are not mentioned here.
[S9300-A] pim
[S9300-A-pim] static-rp 192.168.1.1
Step 4 Configure the threshold of the SPT switchover.
# Configure S9300-C to perform the SPT switchover when the transmission rate of multicast
packets reaches 1024 kbit/s.
[S9300-C] pim
[S9300-C-pim] spt-switch-threshold 1024
[S9300-C-pim] quit
Step 5 Verify the configuration.
# The multicast source begins to send data to the multicast group, and HostA can receive the
data from the source. When the rate is smaller than 1024 kbit/s, you can run the display pim
routing-table command to view the PIM multicast routing table on S9300-C. You can find that
the upstream neighbor is S9300-A. The displayed information is as follows:
<S9300-C> display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
(10.110.5.100, 225.1.1.1)
# When the rate is higher than 1024 kbit/s, you can run the display pim routing-table command
to view the PIM multicast routing table on S9300-C. You can find that the upstream neighbor
is S9300-B. The displayed information is as follows:
<S9300-C> display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
Issue 01 (2009-07-28)
RP: 192.168.1.1
Protocol: pim-sm, Flag: WC
UpTime: 00:13:46
Upstream interface: vlanif100
Upstream neighbor: 192.168.1.1
RPF neighbor: 192.168.1.1
Downstream interface(s) information:
Total number of downstreams: 1
1: vlanif102
Protocol: igmp, UpTime: 00:13:46, Expires:-
RP: 192.168.1.1
Protocol: pim-sm, Flag: ACT
UpTime: 00:00:42
Upstream interface: vlanif100
Upstream neighbor: 192.168.1.1
RPF neighbor: 192.168.1.1
Downstream interface(s) information:
Total number of downstreams: 1
1: vlanif102
Protocol: pim-sm, UpTime: 00:00:42, Expires:-
RP: 192.168.1.1
Protocol: pim-sm, Flag: WC
UpTime: 00:13:46
Upstream interface: vlanif300,
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 PIM-SM Configuration
4-65