Checking The Configuration - Huawei Quidway S9300 Configuration Manual - Multicast

Terabit routing switch
Hide thumbs Also See for Quidway S9300:
Table of Contents

Advertisement

4 PIM-SM Configuration
By default, the interval for checking the transmission rate of multicast packets is 15 seconds.
Step 4 Run:
spt-switch-threshold { traffic-rate | infinity } [ group-policy basic-acl-number
[ order order-value ] ]
The condition of the SPT switchover is set.
l
l
l
----End

4.12.3 Checking the Configuration

Prerequisite
The setting of the parameters for controlling the SPT switchover is complete.
Procedure
l
----End
Example
Run the display pim interface vlanif 15 verbose command, and you can view the PIM
information on VLANIF 15.
<Quidway> display pim interface vlanif 15 verbose
VPN-Instance: public net
Interface: Vlanif15, 10.0.0.15
4-42
traffic-rate: specifies the rate threshold of the SPT switchover.
infinity: indicates that the SPT switchover is not triggered.
group-policy basic-acl-number [ order order-value ]: is used to set the range of the multicast
groups that use this threshold. By default, the threshold is applicable to all multicast groups.
Run the display pim interface [ interface-type interface-number | up | down ]
[ verbose ] command to check the PIM information on the interface.
PIM version: 2
PIM mode: Sparse
PIM state: up
PIM DR: 10.0.0.15 (local)
PIM DR Priority (configured): 1
PIM neighbor count: 0
PIM hello interval: 30 s
PIM LAN delay (negotiated): 1800 ms
PIM LAN delay (configured): 1800 ms
PIM hello override interval (negotiated): 60000 ms
PIM hello override interval (configured): 60000 ms
PIM Silent: disabled
PIM neighbor tracking (negotiated): enabled
PIM neighbor tracking (configured): enabled
PIM generation ID: 0XE5F4034D
PIM require-GenID: disabled
PIM hello hold interval: 36000 s
PIM assert hold interval: 360 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM state-refresh capability on link: non-capable
PIM BSR domain border: enabled
PIM BFD: disabled
PIM dr-switch-delay timer : not configured
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
Issue 01 (2009-07-28)

Advertisement

Table of Contents
loading

Table of Contents