Setting Global C-Bsr Parameters - Huawei Quidway S9300 Configuration Manual - Multicast

4 PIM-SM Configuration
Step 3 Run:
c-rp priority priority
The C-RP priority is set.
Step 4 Run:
c-rp advertisement-interval interval
The interval at which the C-RP sends Advertisement messages is set.
Step 5 Run:
c-rp holdtime interval
The holdtime of an Advertisement message.
The C-RP periodically sends Advertisement messages to the BSR. After receiving the
Advertisement messages, the BSR obtains the holdtime from the messages. During this holdtime,
the Advertisement messages are valid. When the holdtime expires, the C-RP ages.
----End

4.8.3 Setting Global C-BSR Parameters

Context
Do as follows on the S9300 where the C-BSR is configured.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
pim
The PIM view is displayed.
Step 3 Run:
c-bsr hash-length hash-length
The Hash mask length of the C-BSR is set.
Step 4 Run:
c-bsr priority priority
The C-BSR priority is set.
Step 5 Run:
c-bsr interval interval
The interval at which the C-BSR sends Bootstrap messages is set.
4-24
NOTE
The period for holding an Advertisement message from the C-RP must be greater than the interval for
sending Advertisement messages.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
Issue 01 (2009-07-28)