Setting The Neighbor Control Parameters; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast

4.7 Setting the Neighbor Control Parameters

This section describes how to set the parameters for controlling the PIM-SM Hello message.

4.7.1 Establishing the Configuration Task

4.7.2 Setting the PIM Neighbor Control Parameters
4.7.3 Setting the DR Election Control Parameters
4.7.4 Enabling the Function of Tracking a Downstream Neighbor
4.7.5 Checking the Configuration
4.7.1 Establishing the Configuration Task
Applicable Environment
In a PIM-SM network, S9300s exchange Hello messages to establish the neighbor relation, to
negotiate various control parameters, and to elect DRs.
S9300s configured with default values can work normally. You can change the values of relevant
parameters according to the specific network environment. If there is no special requirement,
default values are recommended.
Pre-configuration Tasks
Before setting the neighbor control parameters, complete the following task:
l
l
Data Preparation
To set the neighbor control parameters, you need the following data.
Issue 01 (2009-07-28)
PIM hello override interval (negotiated): 2500 ms
PIM hello override interval (configured): 2500 ms
PIM Silent: disabled
PIM neighbor tracking (negotiated): disabled
PIM neighbor tracking (configured): disabled
PIM generation ID: 0XE5F4034D
PIM require-GenID: disabled
PIM hello hold interval: 105 s
PIM assert hold interval: 3600 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM state-refresh capability on link: non-capable
PIM BSR domain border: disabled
PIM BFD: disabled
PIM dr-switch-delay timer : not configured
Number of routers on link not using DR priority: 0
Number of routers on link not using LAN delay: 0
Number of routers on link not using neighbor tracking: 1
Configuring the unicast routing protocol to ensure that IP routes between nodes are
reachable
4.4 Configuring Basic PIM-SM
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Functions.
4 PIM-SM Configuration
4-17