Enabling Ip Multicast; Enabling Pim-Sm - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
No.
4
5
6
7
8
9

4.4.2 Enabling IP Multicast

Context
Enabling IP multicast is the prerequisite of configuring other IP multicast protocols. Do as
follows on the S9300.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
multicast routing-enable
IP multicast routing is enabled.
----End

4.4.3 Enabling PIM-SM

Context
PIM-DM and PIM-SM cannot be enabled on the same interface. When the S9300 is deployed
in a PIM-SM domain, enable PIM-SM on all non-boundary interfaces.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 PIM-SM Configuration
Data
ACL that defines the range of multicast
groups served by a C-RP
Interval at which a C-RP sends
Advertisement messages
Timeout period during which a BSR waits the
Advertisement message from a C-RP
Hash mask length of a C-BSR
Priority of a C-BSR
Range of SSM group addresses
4-7