Connecting To Mpc - Mitsubishi Electric GOT2000 Connection Manual

3.5.11

Connecting to MPC


Communication settings
Make the communication settings by operating the key
of the control equipment.
Item
*1
9600bps, 19200bps, 38400bps
Transmission speed
0: 8-bit data length, Even parity, Stop bit 1
Communication condition
*1
selection
1: 8-bit data length, Non parity, Stop bit 2
*2*3
0 to 127
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.
3.5.12 Connecting to PBC201-VN2

Communication settings
Make the communication settings by operating the key
of the control equipment.
Item
Communication protocol CPL
*1
9600bps, 19200bps, 38400bps, 115200bps
Transmission speed
0:Even parity, Stop bit 1
Communication condition
*1
1:Odd parity, Stop bit 1
selection
(Fixed 8-bit data length)
2:Non parity, Stop bit 2
*2*3
0 to 126
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.
3.5.13 Connecting to MVF

Communication settings
Make the communication settings by operating the
switch of the control equipment.
Item
*1
9600bps, 19200bps
Transmission speed
8-bit data length, Even parity, Stop bit 1
Communication condition
*1
selection
8-bit data length, Non parity, Stop bit 2
*2*3
0 to F
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.
3 - 54
3. CONNECTION TO AZBIL CONTROL EQUIPMENT
3.5 Control Equipment Side Setting
Set value
Set value
Set value

Settings by switch
Display section
(1) Transmission speed settings
Set the communication condition switch.
Switch No.
Transmission
speed (bps)
1 2
9600 ON ON
19200 ON OFF
(2) Communication condition selection
Set the communication condition switch.
Communication condition
8-bit data length, Even parity, Stop bit 1
8-bit data length, Non parity, Stop bit 2
(3) Station address setting
Set the station address switch.
Station No. setting switch
Communication condition
switch
Station No. setting switch
3
OFF
OFF
Switch No.
4
OFF
ON