Vsan Database - Cisco MDS 9000 series Command Reference Manual

Chapter 25 V Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

vsan database

To create multiple fabrics sharing the same physical infrastructure, assign ports to VSANs, turn on or
off interop mode, load balance either per originator exchange or by source-destination ID, and enter
VSAN database submode, use the vsan database command. To remove a configuration, use the no
command in VSAN database submode.
On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
Note
BladeCenter, the syntax differs as follows:
interface bay port | ext port
Syntax Description vsan vsan-id
interface fc slot/port
interface bay port | ext
port
fcip fcip-id
fv slot/dpp-number/fv-port
iscsi slot/port
OL-8413-07, Cisco MDS SAN-OS Release 3.x
vsan database
vsan vsan-id [interface fc slot/port | fcip fcip-id | fv slot/dpp-number/fv-port | iscsi slot/port |
port-channel portchannel-number.subinterface-number} |
interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] |
loadbalancing {src-dst-id | src-dst-ox-id} |
name name [interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing
{src-dst-id | src-dst-ox-id} | suspend [interop [mode] [loadbalancing {src-dst-id |
src-dst-ox-id}] | loadbalancing {src-dst-id | src-dst-ox-id}] |
suspend [interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing
{src-dst-id | src-dst-ox-id}]]
vsan database
no vsan vsan-id [interface {fc slot/port | fcip fcip-id | fv slot/dpp-number/fv-port | iscsi
slot/port | port-channel portchannel-number.subinterface-number} |
interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] |
loadbalancing {src-dst-id | src-dst-ox-id} |
name name [interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing
{src-dst-id | src-dst-ox-id} | suspend [interop [mode] [loadbalancing {src-dst-id |
src-dst-ox-id}] | loadbalancing {src-dst-id | src-dst-ox-id}] |
suspend [interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing
{src-dst-id | src-dst-ox-id}]]
Specifies the VSAN ID. The range is 1 to 4093.
(Optional) Specifies the Fibre Channel interface by slot and port number
on a Cisco MDS 9000 Family switch.
(Optional) Specifies the Fibre Channel interface by port number on a
Cisco Fabric Switch for HP c-Class BladeSystem or on a Cisco Fabric
Switch for IBM BladeCenter. The range is 0 to 48.
(Optional) Specifies the FCIP interface on a Cisco MDS 9000 Family
switch.
Configures the virtual F port (FV port) interface in the specified slot
along with the data path processor (DPP) number and the FV port
number.
(Optional) Configures the iSCSI interface in the specified slot/port on a
Cisco MDS 9000 Family switch.
Cisco MDS 9000 Family Command Reference
vsan database
25-9