Zone Convert Zone - Cisco MDS 9000 series Command Reference Manual

Chapter 27 Z Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

zone convert zone

To convert the zone member type from one type to another, use the zone convert zone command in the
configuration mode.
Syntax Description name
source-member-type
dest-member-type
vsan vsan-id
Defaults None.
Command Modes
Configuration mode.
Command History Release
3.2(1)
Usage Guidelines To use this command, all members have to be logged in. The conversion will fail even if a single member
conversion is not achieved.
Table 27-1
Table 27-1 Conversion Matrix of the Member Types
Source Member Types
fWWN
Interface
Interface-Domain
pWWN
FCID
Device-Alias
OL-8413-07, Cisco MDS SAN-OS Release 3.x
zone convert zoneset name source-member-type dest-member-type vsan vsan-id
Displays the name of the zone or zoneset. All members of the specified zone
or zoneset will be converted to the new type.
Displays the member type of the members that have to be converted. The
values of the supported source member types include fWWN, pWWN,
Device-Alias, FCID, Interface and Interface-Domain.
Displays the member type of the destination member. The values of the
supported destination member types include fWWN, pWWN, Device-Alias,
FCID, Interface, and Interface-Domain.
Displays the VSAN ID.
Modification
This command was introduced.
describes the conversion matrix of the member types supported by this command.
Supported Destination Member Types
pWWN, FCID, Device-alias, Interface, Interface-Domain
pWWN, FCID, Device-alias, Interface, Interface-Domain
pWWN, FCID, Device-alias, Interface
FCID, Device-Alias
pWWN, Device-Alias
FCID, pWWN
Cisco MDS 9000 Family Command Reference
zone convert zone
27-9