Update License - Cisco MDS 9000 series Command Reference Manual

Chapter 24 U Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

update license

To update an existing license, use the update license command in EXEC mode.
Syntax Description
update license
url
bootflash:
slot0:
volatile:
filename
Command Modes
EXEC mode.
Command History Release
1.3(2)
Examples The following example updates a specific license.
switch# update license bootflash:sanextn2.lic sanextn1.lic
Updating sanextn1.lic:
SERVER this_host ANY
VENDOR cisco
# An example fcports license
INCREMENT SAN_EXTN_OVER_IP cisco 1.000 permanent 1 HOSTID=VDH=ABCD \
with bootflash:/sanextn2.lic:
SERVER this_host ANY
VENDOR cisco
# An example fcports license
INCREMENT SAN_EXTN_OVER_IP cisco 1.000 permanent 1 HOSTID=VDH=ABCD \
Do you want to continue? (y/n) y
Updating license ..done
OL-8413-07, Cisco MDS SAN-OS Release 3.x
update license {url | bootflash: | slot0: | volatile:} filename
Updates an installed, expiring license.
Specifies the URL for the license file to be uninstalled.
Specifies the license file location in internal bootflash memory.
Specifies the license file in the CompactFlash memory or PCMCIA card.
Specifies the license file in the volatile file system.
Specifies the name of the license file to update.
Modification
This command was introduced.
NOTICE=<LicFileID>san_extn1.lic</LicFileID><LicLineID>0</LicLineID> \
SIGN=33088E76F668
NOTICE=<LicFileID>san_extn2.lic</LicFileID><LicLineID>1</LicLineID> \
SIGN=67CB2A8CCAC2
Cisco MDS 9000 Family Command Reference
update license
24-3