When Nozzle Clogging Cannot Be Solved
When nozzle clogging cannot be solved even after the head cleaning (
following two functions:
NOZZLE WASH
NOZZLE RECOVERY
Washing of Head nozzle
Perform cleaning of the nozzles in the heads to prevent them being clogged with coagulated ink.
Check the items on the
right beforehand.
1
Press the
2
Press
3
Press the
• The carriage moves onto the belt.
4
Clean the wiper and the bracket.
(1) Open the right maintenance cover then pull out it by holding projections at both ends of the wiper.
(2) Clean the wiper and bracket with a clean stick dipped in cleaning solution for maintenance.
(ML003-Z-K1) Wipe off so that cleaning solution for maintenance will not remain.
(3) Insert it in the original position by holding the projections at both ends of the wiper.
5
Press the
• Wash the head nozzle. (
• Alternative nozzles for printing, when nozzles missing can not be improved.
(
P.4-19)
Is [INK END] displayed?
• The ink is absorbed when the nozzles are washed.
At this time, if the state of "INK END" is detected, the nozzle washing operation
cannot start.
• Replace the ink bottle with new one for which ink end has not been detected.
key in LOCAL.
MAINT.
to select [NOZZLE WASH].
key.
• Until wiper cleaning is competed, [COMPLETED (NEXT): ENT] is displayed on the screen. After
the work up to the step 4 is completed, press the
before cleaning is completed, the machine moves to the next washing procedure.
key.
• Until wiper cleaning is competed, [COMPLETED (NEXT): ENT] is displayed on the screen. After
the work up to the step 6 is completed, press the
before cleaning is completed, the machine moves to the next washing procedure.
P.2-32) has been done, perform the
P.4-17)
CARR I AGE OU T
NOZ Z L E WASH
WI PER C L EAN I NG
COMP L E T ED ( NEX T ) [ EN T ]
key. If you press the
Projection
CA P C L E AN I NG
COMP L E T ED ( NEX T ) [ EN T ]
key. If you press the
1
[ EN T ]
1
[ EN T ]
key
1
4
key
4-17