Changing Passwords; Delete Password - Eaton easySafety Manual

02/16 MN05013001Z EN
CHANGE
M PASSWORD
XXXXXX
CHANGE
M PASSWORD
254752
ASSIGN
S PASSWORD
000000

Changing passwords

Unlock the easySafety device as previously described.
X
Press DEL and ALT to call up the System menu.
X
Open the password menu, for example, via menu items S
X
PARAMETERS -> PROTECTION -> M PASSWORD for
changing the master password.
h The safety password is changed in the same way via S
PARAMETERS -> PROTECTION
-> S PASSWORD. For this standard password use STD
PARAMETERS -> PROTECTION -> STD PASSWORD.
Press OK to enter the password entry menu.
X
Press OK to move to the 6-digit entry field.
X
The current password will be displayed.
Modify the six password digits using the cursor buttons.
X
Confirm with OK.
X
Use ESC to close the entry screen.

Delete password

Press DEL and ALT to call up the System menu.
X
Open the password menu to delete the password:
X
– for the safety password via menu items S PARAMETERS
-> PROTECTION -> S PASSWORD.
– For the standard password use STD PARAMETERS ->
PROTECTION -> STD PASSWORD.
h The master password is protected specially and can there-
fore be changed but cannot be deleted!
If a password is not entered, the easySafety device shows six
dashes. An existing password is displayed with XXXXXX.
Delete the safety or standard password by entering the
X
value 000000.
Password protection
577