Device Version - Eaton easySafety Manual

easySafety internal

Device version

632
– or R: Relay output,
– N: easyNet interface available.
• X/-
– Display present/not present. This information can only
be displayed by a locally connected MFD-CP4/-CP8
device in Terminal mode. If the remote device is run
without a display, the MFD-CP4/-CP8 shows a blank
this position.
Line 5: OS-VER e.g. 1.00.60, version of the operating
system.
Line 6: OS-CRC e.g. 5825, Checksum of the operating
system is only displayed in STOP operating mode.
Every easySafety has the device version number printed on
the left of the device housing. The device version is indicated
by the first two digits of the device number.
Example: 01-402110000404
01-402110000404
DC 20.4 - 28.8 V
6 W
This device is of device version 01.
The device version provides useful service information about
the hardware version and the version of the operating
system.
02/16 MN05013001Z EN