Eaton easySafety Manual page 213

02/16 MN05013001Z EN
Example 6: Copying of marker bytes, invalid offset error.
The value of marker word MW40 is to be copied to MW54
and subsequent marker words. The block length is specified
by the value of the counter C 01QV.
• Parameters of function block BT01:
– Source range:
– Destination range:
– Number of bytes:
h
The value of C 01QV is 10042. This value is too big. The
value at >NO can be between 1 and +383.
The message "The specified offset of the destination range
is outside of the permissible range" is output.
BT01E3 is 1.
BT, data block transfer
>I1 MW40
>I2 MW54
>NO C 01QV
209