Deleting The Standard Circuit Diagram; Deleting The Safety Circuit Diagram - Eaton easySafety Manual

02/16 MN05013001Z EN
CIRCUIT DIAGRAM
FUNCTION RELAYS
DELETE PROGRAM
IS01====IS02-------------------Ä QS01
L: 1 C:2 RUN
Figure 45: Power flow display: Input
IS0
= Visible area

Deleting the standard circuit diagram

Switch the easySafety device to STOP mode.
X
h
In order to expand, delete or modify the standard circuit
diagram, easySafety must be in STOP mode.
Choose STANDARD -> PROGRAM... to switch from the
X
main menu to the appropriate menu level.
Select DELETE PROGRAM
X
The easySafety will display the prompt DELETE?.
Press OK to delete the program or ESC to cancel.
X
Pressing ESC once more returns you to the previous menu
X
level.

Deleting the safety circuit diagram

You can delete the safety circuit diagram using the DELETE
ALL function in the system menu.
h The DELETE ALL function is used to delete the safety circuit
diagram and standard circuit diagram.
The first circuit diagram
IS01
2 is open, relay QS1 has dropped out
is closed, input
107