Function Block Inputs (Constants, Operands) - Eaton easySafety Manual

02/16 MN05013001Z EN
Input Meaning of abbrevia-
tion
DT Discrepancy Time
DY1 Day 1
DY2 Day 2
ED Enable Duration
F1 Factor 1
F2 Factor 2
FR Rotational FRequency
FT Feedback Time
HY HYsteresis
I1 Input 1
I2 Input 2
KP Channel
MT Muting Time
NO Numbers Of elements
ON ON
OFF OFF
OS OffSet
R T Over Ride Time
SH Setpoint High
SL Setpoint Low
ST Synchronisation Time
SV Set Value
T1 Time 1
T2 Time 2

Function block inputs (constants, operands)

Description
Discrepancy time
Day 1 of the period
Last day of the period
Enable time
Gain factor for I1 (I1 = F1 x Value)
Gain factor for I2 (I2 = F2 x Value)
Actual value rotation frequency
Monitoring time of the feedback loop
Switching hysteresis for value I2 (Value HY
applies to positive and negative hysteresis.)
1st input word
2nd input word
Input channel that is switched through to the
output.
Muting time
Number of elements
Closing delay or on date
Off time or date
Offset for the value I1
Override release time
Upper limit value
Lower limit value
Synchronisation time
Defined actual value (Preset)
1. Time value
2. Time Value
List of function blocks
639