02/16 MN05013001Z EN
j
2
Installation
easySafety devices must only be installed and wired up by
qualified electricians or other persons familiar with the
installation of electrical equipment.
Danger of electric shock!
Never carry out electrical work on the device while the
power supply is switched on.
Always follow the safety rules:
• Switch off and isolate.
• Verify isolation from the supply.
• Secure against reclosing.
• Short-circuit and ground.
• Cover adjacent live parts.
The devices are easySafetyinstalled in the following order:
• Mounting
• Wiring up the inputs.
• Wiring up the outputs.
• Wiring easyNet network (optional).
• Connecting serial multi-function interface (optional).
• Connecting the power supply.
39