Eaton easySafety Manual page 129

02/16 MN05013001Z EN
Saving a configuration on the memory card
(DEVICE -> CARD)
h In devices without a display and keypad, transferring a
configuration to the memory card is not possible.
Requirements:
• The device in the STOP.
• A memory card must be fitted in the device.
• You are in the CARD menu and password protection is
removed, a figure 46 on page 124.
Cancel
Figure 47: Save configuration on card
h
When transferring to the card, the password protected
areas of the configuration are retained.
Transfer from and to the
memory card
DEVICE -> CARD
yes
no
REPLACE?
ESC
yes
OK
Configuration is transferred
to the device.
125