Connection To A Pc - Eaton easySafety Manual

02/16 MN05013001Z EN
h

Connection to a PC

Connect one of the following programming cables to the
COM or USB interface of your PC and to the serial multi-
function interface of the easySafety device.
Programming cable
Table 5:
Device Programming cable
easySafety EASY800-PC-CAB
easySafety EASY800-USB-CAB
Figure 25: Connecting the programming cable a to an
easySafety device
Remove the cover from the interface and fit the connector
X
plug.
Caution!
When connecting the programming cable, the easySoft-
Safety programming software must be offline. On no
account should the programming cable be moved from
one easySafety device to another when the connection is
online.
Connecting the serial multi-
function interface
for connecting to a PC
Baud rate
up to 19.2 KBaud
up to 57.6 KBaud
69